Alder
Custom Shop Skip
Clear Cutting Boards
One-Face cutting (CF1)
Custom Shop Skip grade is used by customers who may want a thinner net finish for panel production, cabinetry, and furniture.
Custom Shop Skip consists of boards that will grade as Custom Shop when re-dressed 0.13 inches (3.30 mm).
| 6'1" | 7'1" | 8'1" | 8'3" | 8'3" solid pack | 10'1" | 12'1" | |
|---|---|---|---|---|---|---|---|
| 8/4 | • | • | • |
Possible Defects:
Sander Skip permitted
Widths, Lengths & Cuttings
Width Specs:
3.5 inch (88.90 mm) minimum.
Length Specs:
72 inch (182.88 cm) minimum.
Cutting Specs:
3 inches (76.20 mm) by 36 inches (91.44 cm) or 4 inches (101.60 mm) by 24 inches (60.96 cm) C1F. No Limit to the number of cuttings allowed.
Grade Notes
This grade admits all boards of 24 inches (60.96 cm) and over surface measure yielding not less than 66.66 percent clear, one face (C1F) cuttings with the reverse side of the cuttings sound as defined in "SOUND CUTTING".
Side bend, as defined in "SIDE BEND" limited to 1inch (25.40 mm).
Pin knots, as defined in "PIN KNOTS" are not considered defect.
Skip less than 0.100 inch (2.54 mm) (depth combined from both faces) is not considered defect.
