Alder
Cabinet Skip
Clear Cutting Boards
Two-Face cutting (CF2)
Cabinet Skip grade is used by customers who may want a thinner net finish for panel production, cabinetry, and furniture.
Cabinet Skip consists of boards that will grade as Cabinet when re-dressed 0.13 inches (3.30 mm).
| 6'1" | 7'1" | 8'1" | 8'3" | 8'3" solid pack | 10'1" | 12'1" | |
|---|---|---|---|---|---|---|---|
| 8/4 | • | • | • |
Possible Defects:
Sander Skip permitted
Widths, Lengths & Cuttings
Width Specs:
3.5 inch (88.90 mm) minimum
Length Specs:
72 inch (182.88 cm) minimum
Cutting Specs:
3 inches (76.20 mm) by 36 inches (91.44 cm) or 4 inches (101.60 mm) by 24 inches (60.96 cm) C2F. No Limit to the number of cuttings allowed.
Grade Notes
This grade admits all boards of 24 inches (60.96 cm) and over surface measure yielding not less than 66.66 percent clear two face cuttings. Boards are graded from the poorer face.
SIDE BEND is limited to 1 inch (25.40 mm).
PIN KNOTS are not considered defect.
Skip less than 0.100 inch (2.54 mm) (depth combined from both faces) is not considered defect.
