CABINET CABINET grade is a high-grade product superbly suited for cabinet and panel production requiring two exposed faces. CABINET was developed to maximize yields of clear two face cuttings in 24 inch to 56 inch (60.96 to 142.24 cm) lengths, with minimal development of cuttings below 24 inches (60.96 cm). Widths: 4.5 inches (114.40 mm) minimum , admitting 5 percent (by volume) narrows. Lengths: 72 inch (182.88 cm) minimum. Minimum Size Cuttings: 3 inches (76.20 mm)  by 36 inches (91.44 cm)  or 4 inches (101.60 mm) by 24 inches (60.96 cm) C2F.  No Limit to the number of cuttings allowed. Grade Notes: This grade admits all boards of  24 inches (60.96 cm) and over surface measure yielding not less than 66.66 percent clear two face cuttings. Boards are graded from the poorer face. SIDE BEND is limited to 1 inches (25.40 mm). PIN KNOTS are not considered defect.